Impact Resistance Test in Home Furniture

Impact tests are those that assess the strength of the cabinet against the occasional impact that will happen during its lifetime.

HEIGHT IMPACT

Before determining the impact point is placed a sheet of foam, from which we determine the drop height of the impactor. Then, place a second sheet of foam.

The test method is performed according to the following process: first determine the loading point of the seat (point on the seat in the vertical center of mass of the user’s mass) then place a sheet of foam to determine the drop from of it until the impactor, then place a second sheet of foam between the first and the impactor and finally dropped freely impactor with a mass of 25 kg. This process is repeated 10 times and any other position that is considered of importance. If it is a product intended to be used by more than one person, try a square from one end and a central place.

A test which simulates the same is based on American standards ANSI / BIFMA: the test procedure is to drop freely a mass of 102 kg that hits the seat from a fixed height of 152 mm measured from the uncompressed seat to the base of the bag. After it, the test is repeated, this time with a bag loaded with 136 Kg. After the first impact of the seat, it must to be fully operational and after the second must have been produced no sharp breaks.

HEADS RESISTANCE TESTS

Impactor is situated to the starting position of test and control the test parameters, such as time between impact and stop in case of breakage.

Another way to test the seams and seat structure is applying energy from impact test on backrests and armrests. To test is essential to block the movement of the seat sliding and impact in the center of the upper back (or at the rear edge of the seat if it is backless chairs) or on the side of the armrest in the position considered most unfavorable. A total of 10 impacts at each element, from the outside in, with the impact hammer, that consists of a cylindrical head of 6.5 kg mass attached to a steel tube 38 mm in diameter with a thickness of 2 mm and a length of 1 m to the low friction joint. The angle of fall of the hammer to the achievement of impact varies between 38 º and 68 º depending on its intended use the seat.

TABLE IMPACT TEST

In the studies of impacts on tables is turned on the strength of the table to occasional impact when placing things on top of it. The test consists of dropping the impactor freely over the top of the table 10 times, following the same steps that in the case of impacts on the seats of the chairs. The drop height varies between 180 and 240 mm, in the case of tables with glass top security than the drop height varies between 240 and 300 mm, in this case, instead of using two layers of polyether 25 mm thick, using a polyether foam 100 mm thick.

BATHROOM AND KITCHEN FURNITURE IMPACT TEST

It determines the resistance to hard charges located on the drawers of kitchen and bathroom. The test consists of dropping a steel ball of 42.8 mm diameter and a mass of 324 g from a height of 600 mm above the bottom of the drawer when the drawer is 2 / 3 of its total opening. At the end of the test evaluates the possible flaws that affect the mechanical strength or functionality. The fronts of the kitchen and bathroom cabinets (doors and drawers) are impacting the central part of himself with a leather ball with a diameter of 200 mm and a mass of 5 kg from a height of 500 mm. In the case of lower cabinets with doors, are tested after being closed and opened 45 degrees and found that there are no breakages and that the elements continue to function correctly.

TEST IMPACTS ON CHILDREN’S FURNITURE

The impact tests on children and juvenile furniture ensure durability of the model at such issues as the base (cribs), trays (chairs), mattress, safety barriers, etc.., Special mention by the type of furniture and what type of audience that will be use it, where any defect in design or accidental breakage of any component can cause a serious accident.

Test consists on impacts on both the mattress and in the barrier. The base of the cradle hits a thousand times in each of the six points identified by the European Standard. Its dropped freely and avoid the impactor rebounds (10 kg device with a tip mass in the opposite hemisphere and a guide to maintain the vertical and secure the point of impact) from a height of 150 mm between the base and the impactor is placed a cushion with a density test (35 + 2) kg / m3 and a thickness of 60 mm, dismissing every 5 completed trials.

To test the resistance of the head and sides of the cribs, the impactor is placed lateral (pendulum of steel cylindrical head covered with a layer of rubber 10 mm thickness and a hardness between 76 IRHD and 78 IRHD with a total mass of 2 Kg) ready to hit the crossbar or side 10 times from outside and the next rung 10 times from inside to hit all the bars (or all points determined whether it is solid side). The impact is made on a point at a height of 200 mm below the top edge of the side, dropping freely side impact from a horizontal position. Each and every one of the corners of the cribs are impacting five times inside and five on the outside as close as possible to the top edge impactor dropping freely from a 60-degree angle.

Berths are also tested by impacts. The bases are tested on the two beds and the steps of the staircase to the upper bed. The impacts on the bunk bed frame are made on seven points from a height of 180 mm measured from the top of the mattress test (in this case, with a density of (30 + 2) kg / m3 and 100 mm thick ). The impact on the steps of the staircase leading to the upper bed is performed ten times in each of the following: on the steps above, below and you’re closer to the center, hitting the center and as close to one side as possible, is dropped from 150 mm impactor (consisting of a bar of 1400 mm, which places a mass of 15 kg, finished in a steel plate of 100 * 100 * 6 mm).

Top 4 Essentials For the Designer Home (Designer Teapots Are a Must)

We’ve got the top tips to help make your home the envy of all the neighbourhood. With just a few simple tips up your sleeve you’ll see how easy it is to transform your interior. From colour schemes to items which are functional and display worthy such as the teapot you’ll be surprised how easy it is to revamp your home.

Colour schemes

The colours of your walls, floorings and furniture make a huge difference to your home. Classic and simple is always best. When choosing which colour to paint a room always think to yourself, how will this look in 5 years time? It may seem like playing it safe but by keeping with set colour schemes throughout your house you’ll find the flow of the space much better than if you had multiple colours throughout.

This is not to say that a feature wall is out of the question. Just make sure it marries with all of the other colours in the house. If your using crisp whites and cooler blues, stay with that colour palette. If you are using creams and warmer tones of yellow, stay with colours that match those tones. As a general rule, ceilings should always be white.

Timeless furnishings

Furniture can be a difficult to purchase. The main thing to remember is to purchase items which are of a high quality and are not designed simply because of the emergence of a brief trend. By that I mean choose furniture that is classic and marries together.

Lounges and dining room suites should match in similar colours and if you have wood furniture it’s best that all pieces are similar in colour unless you are going to use antiques to decorate your home. To manage the contemporary look in any home the colours need to be minimal and consistent.

Quality items that are multifunctional

Items that are functional and decorative are perfect in contemporary homes. A bright coloured glass vase or a silver teapot can really lift a room and are also items which are functional. They allow you to have decorative items around the house without cluttering and they also double as a functional item as required. So that means you don’t need to host a tea party in order to show off your Victorian style silver teapot.

Mirrors also work wonders in small areas. They can give the illusion of more space. When choosing a mirror, the size and frame is crutial. Make sure the frame blends in with the rest of the decor and the placement of the mirror is effective in creating the illusion of more space. Putting a mirror at the end of a hallway or as a feature on a main wall of the house is most effective.

The golden rule

Always remember. Less is more. When going for the contemporary look in your home keep it minimal. No excessive displays of trinkets or wall hangings. A few simple feature pieces are the way to go.

Tips to Reuse Old Home Furniture

Furniture is always being an important part of the house and it makes your house perfect. It is said that a house cannot become a home without proper furniture. But it is also true that nothing can last forever and so is your furniture. Every furniture item comes with an expiry date.

There are many reasons responsible for a furniture item not getting used any longer. The possible reasons are furniture expiry as mentioned early, user getting bored with a particular furniture item, furniture damage, destruction, etc. The thing I want to say is that a large number of furniture items are thrown away every now and then by many house owners. The reason is that most of the people do not know how to reuse their old furniture.

Here, in this post, I am going to discuss some good tips of using the old furniture.

Purchase Recyclable and Green Furniture: Though this is not the thing to tell now, but as this is the basic, so it is needed to be discussed. The best solution for preventing the wastage of items is recycling and this is also true for furniture items. Today many furniture manufacturers are introducing new recyclable and more eco friendly furniture designs so you can get a good deal online.

Reuse the Old Furniture: Instead of throwing the old furniture, you should think of all the possible uses you can make of it. There are many things you can do and many items you can make from the old furniture for example you can use top of the table as a board, tops of a stool as a frame or tray, old chair as a stool, or you can break the furniture to use its parts separately for different purpose.

Get your broken Furniture Repaired and Renovated: If it is possible to get damaged furniture repaired, go for it. You can prefer throwing a furniture item due to a minor damage and can buy a new one, but you should know that natural resources are limited and one day, they will be finished and then you will be left with no option other than reusing the old items, so why not do that from now on. You also have an option of renovating your furniture. You can find many articles on the internet on how to renovate your old furniture.

Sell it or Donate it: Though this is the last option to be followed, but I think this is the best option. There is always someone who can use your old items better. You can sell your old furniture if it is in good condition. There are many good websites that provide you with the option of selling old items for free. Other option is to donate the old furniture to a person, or an organization, a trust, etc.

Interior Design Home Decorating – Trendy Living Room Coloring Ideas

Synchronizing Colors and Themes

The first thing to do after you have decided which decorating style theme you will use for your living room in your new home or while renovating your existing home, you have to decide which color scheme you will use. You have to keep in mind to color coordinate with the color theme of your furniture, upholstery, furnishing accessories, floor covering, carpets, etc.

Another option is to begin with the furniture and coordinating paint colors with it. You may try to start with the major piece of furniture in the room or the room’s central point. Either use balancing colors or make the focal point stand out with something light around it.

Choosing Classic Colors That Still Works

The most fashionable color today is still the various tone of white or off-white because it makes the room look very large and also makes small pieces, like lamps and tables, look larger. White also adds light to your living room while helping to keep it cooler in the summer months. However, too many rooms with white walls tend to make your home look sterile or generic, not to mention the time you’ll have keeping your walls clean.

Great Colors Options

A great idea would be to add hints of colors to complement your white walls. You can use a little tan for your trim some tones in light green or blue, or a tan or taupe accent wall.

Brown: There is nothing like the shades of brown to bring out warmth and blend in nicely with just about everything. But be cautious to use brown colors in a small living room as it may dominate the room, oppressing the colors of your furniture and accents. Shades of Tan or taupe will work, although.

Reds: The color Red is a classic shade because they are so bold, vivacious and daring. Reds work especially well with light colored furniture, making it stand out even more. Still, people like to use red as an accent color with just a hint of that shade, more than a main wall color. But nowadays, a few people dare t o paint their walls red too.

Blues: Blues are cool and most often related with French country, Victorian or marine designs. In the more traditional uses, blue is great for expressing formality due to its consoling nature. Nonetheless, blue suggests countless different hues that can change outlook as well as atmosphere.

Learn from what you have read and got the basic ideas from different places and start experimenting. There are several excellent professionals who also provide color consultations to their customers. Hopefully, these few tips will help you find your own living room paint colors and get you on your way to creating the living room of your dreams.